DIAMOND REO 2 1/2 TON CIRCUS GENNIE LORRY 'BILLY SMART'S CIRCUS'. This is a Diamond Reo lorry owned by Billy Smart's Circus. The chassis has had the middle section removed as the real lorry was shorter than this donor model. At the rear a platform has been fitted which is carrying two generators. A real vehicle. Reg number 897AMO. |
|
A.E.C MAMMOTH MAJOR 8 WHEEL GENERATOR 'AUSTEN BROTHERS CIRCUS'. This will be an A.E.C Mammoth Major eight wheel box lorry. This was used to carry a generator. Lots to do especially the decals for the lorries artwork. This was a real vehicle. Reg number HWC829. |
|
A.E.C MARSHALL GENNIE/CRANE LORRY 'BILLY SMART'S CIRCUS'. This is a model of a real vehicle owned by Billy Smarts. This was an A.E.C Marshall 6x4 lorry. The lorry carries a generator unit and is equipped with a Hiab crane. A real vehicle. Reg number JPU850H. |
|
SCAMMELL ROUTEMAN ELEPHANT CARRIER 'AUSTEN BROTHERS CIRCUS'. This will be a model of a Scammell Routeman 8x4 animal box lorry. This belonged to Michael Austen and was used to carry the Indian elephants. Lots to do as the cab at present is from a Scammell Trunker so needs alteration to the wheel arch area and attaching to the donor chassis. A scratch built box needs making. Specific decals for this lorry will also need designing. This was a real vehicle. Reg number ULA589M.
|
|
SCAMMELL CONTRACTOR 'AUSTEN BROTHERS CIRCUS'. This is a conversion of the Corgi Scammell Contractor in Austen Brothers Circus livery. The lorry will be stripped back and repainted in the later livery of bright red and bright yellow. The ballast weights as fitted by Corgi will be removed and replaced with the large round tank which this lorry always seemed to be carrying. New decals will have to be designed for this model. A real vehicle. Reg number VLH434G. |
|
E.R.F FLAT WITH BOX 'BILLY SMARTS CIRCUS'. This will be a E.R.F 8x4 flat platform with box in the livery of Billy Smarts Circus. The model needs stripping and repainting along with the packing box which needs fitting to the platform. Decals need making for the model.
|
|
| |