Dragonfly35

Specifications & Inventory:

The design of the DF35 is unsinkable, and for a crew of up to six it complies with the relevant EU recreational craft directive for boat design category A.

NOTE: It is well recognised that contemporary hi-tech laminated sails have a relatively short service life. Whilst Kanga-Roo-Too's foresail is still in service, it could be considered due for replacement. Common sense suggests that it would be better to offer a prospective new owner the flexibility of purchasing their preferred replacement, and hence in considering the asking price negligible worth has been attributed to the foresail (and a relatively low proportionate value has also been attributed to the mainsail). The spinnaker and code 0 have seen an order of magnitude less service.  

Base specification for the Ultimate version comprises:

• All three hulls in white gelcoat finish + cabin and structural parts of the interior are made in hand-laid fibreglass combined with PVC foam core sandwich construction - white non-skid on deck areas. The wings and structural bulkheads are made in UD and biaxial fibres in vinylester resin - tempered.

• GRP centreboard and epoxy rudder, both with kick-up system and downhaul.

• Interior in varnished teakwood. 6 x cabin windows in acrylic with alloy frames + 1 x (openable) cockpit window in aft cabin. 5 x hatches of acrylic/aluminium in total on all three hulls.

• Volvo D1-30F saildrive, 3-cylinder diesel, 30 HP, fresh water-cooled [869645-5102126034U].

• S Drive (reverse gear) transmission [MS130SR-B].

• 80 litres stainless fuel tank, with deck fill and gauge.

• One 50 Amp/h battery for the engine, and 3 x 70 Amp/h (maintenance free) AGM-batteries for the domestic supply.

• Complete 12V electrical installation with remote master switch and fuses + one 12V plug.

• Various cabin lights. Navigation lights. Anchor light in masthead. Compass with light.

• One 12V automatic bilge pump – hand pump for main bilge operated from cockpit.

• 140 litres water tank serving sinks in galley and heads with pressurised water.

• Jabsco marine toilet with 60l holding tank & gauge and electrical pump-out to sea or deck outlet.

• 2-burner gas stove flush mounted with cover, incl. 3 kg camping gaz bottle.

• Curtains in main cabin. 10 x fabric interior cushions.

• 2 x trampoline nettings in heavy duty material, UV-stabilised.

• 4 x waterstays in 14mm high tension Dyeform cable quality. Bow pulpit and handrails on cabin roof in stainless . One bathing ladder in stainless on one float.

Std Ultimate deck gear comprises:

• 2 x self-tailing winches Andersen 46 on cabin top for halyard and genoa sheets.

• 2 x self-tailing winches Andersen ST 40 winches for mainsheet control & 2 x winch handles.

• Ronstan traveller and genoa track system with outhaul and all blocks. 17 x Easy Midi stoppers.

• Facnor RS165 (custom) below deck furling system on 10mm dia forestay.

• 4 x mooring cleats in stainless and 4 mooring lines, each 14m.

• Jefa wheel steering.

Std Ultimate rig gear comprises:

• 17.5 m full carbon mast and rigging, spreader system & diamond stays.

• Ronstan batten car system – ball bearing Headsail roller reefing system.

• Boom - aluminium, with two single line reefs (Dyneema lines) and lazy-jack system.

• All sheets and lines for controlling the standard sails. All functions led to cockpit.

• Elvstrom 67m2 mainsail in high-tech Elvstrom Epex laminate with Technora black fibres, including 8 battens and 3x reef points (but see note at top of section).

• 35m2  furling genoa in high-tech Elvstrom Epex laminate with Technora black fibres including 3 battens in the leech and E-foam in the luff (but see note at top of section).

• Flag lines and Windex.

• Dyneema halyards and backstays. Upper sidestays in high-tech fibre quality.

Some of the more significant extra cost options or accessories applicable to this particular Dragonfly 35 include:

• 'Classic' interior fit-out offering a more relaxing & traditional living arrangement (larger folding table with comfortable seating both sides, and redesigned galley moved aft). A spin-off of the classic interior is that an additional full length berth (with storage below) becomes available along the port side. Using the leecloth provided this offers an excellent sea berth.

• Hempel Hard Racing White antifouling (#76300-10101) over epoxy primer. [Note: HHRWHITE4 antifouling]

• Underwater epoxy barrier Gelschield-International

• Metallic paint (LZ3G-6P 738325 CANYONROT-MET) applied to all three hulls

• Stripework colour 3M-100-723

• Gelcoat RAL hull and mast colour: 9010

• Cabin teak floor, varnished, with white stripes (teak and holly)

• Wheel upgraded to 1,200 mm carbon

• Protective cover for wheel

• Grey sprayhood with 3 windows, grab handles, and rubbing strip (new 2019)

• Grey cockpit tent with 3 openings and windows

• Folding 16" dia x 11" pitch Flexofold 3-blade propeller

• RMC/Lewmar electrical, retractable, swing bow thruster, incl extra battery - controlled from helm

• Eberspächer D2, diesel heating unit, with outlet in aft & main cabins and toilet

• Hot water (20 l) connected to engine, incl 220V heating spiral and taps

• Pressurised saltwater tap in galley

• Shower in toilet with Gulper pump direct into sea

• Refrigerator 12V (100 l) built into 'Classic' galley cabinet with compressor

• Gas oven & grill, built into cabinet at galley

• Gauge for water tank

• 4 x cockpit floorlights

• 220V shore power & supply cable. F1 fuse system. 20 Amp automatic charger. 3 outlets

• Sunware photovoltaic solar panel (48W) on cabin top with battery control

• Sunware photovoltaic solar panels (2 x 48W) on the floats, incl FOX-150 charge regulator

• Running and anchor lights LED upgrade, Loopo LED Tri-colour masthead light

• Deck light

• VHF-antenna in masthead with deck plug at mast base. Navicom RT-650MOB DSC Marine Radio

• Sony radio/CD/media-player incl 2 internal speakers and antenna

• 2 x water resistant cockpit speakers for Sony radio

• 3 x portlights in freeboard for front v-berth and aft cabin

• Roller blind and mosquito net for deck hatches, flush mounted in main cabin, toilet, and v-berth

• Cabin top ST 46 winch upgrade to electrical compact

• 2 x Andersen ST 28 winches on cockpit coaming for controlling spinnaker etc

• Barberhaul system for genoa and spinnaker, incl cleats, blocks & jammers

• Boom vang (preventer system)

• Blocks and sheets for spinnaker + fastening point

• 1.5m retractable carbon bowsprit, incl tack line led below deck to cockpit

• Elvstrom 124m2 trioptimal asymetric spinnaker

• ATN snuffer for spinnaker

• Elvstrom 72m2 carbon screecher/code 0 incl endless furling system

• Mainsail cover, red

• UV-protection on furling genoa

• Anchor deck fitting in stainless

• Electrical anchor windlass below deck

• Spade A100 aluminium main anchor

• 4 x Fenders

• Winch handle pocket on wheel pedestal

• Hammar self inflating horseshoe lifebuoy LS101 recessed into cockpit coaming

• Clock, barometer and thermometer with Dragonfly logo

• Canoe hatch in transom of one float for storing canoe or windsurfer

• Stainless lifting eyes and set of lifting straps

• Custom built winter storage cradle

• NMEA 2000 system installation

• Raymarine RD418D radar (4kw 18" Radome)

• Raymarine ST 6002 autopilot incl SPX10 course computer and Jefa direct drive

• Raymarine E90W (touchscreen chartplotter with Navionics for NW Europe)+ ST70 instrument display  + 2 Maretron DSM250 multifunction displays

• Maretron GPS100

• MaretronWSO100 Ultrasonic wind/weather station

• Airmar Smart Tri Multisensor (depth/speed/temp)

• Digital Yacht iAIS receiver

• 3m x 2m canvas bimini with sewn in zip, webbing, support straps, c/w sectional fibreglass hoop and bungee cords

• 1 x Canoe (with paddle) - garaged in starboard float

• Watt&Sea hydro generator

• Ventura 200T Spectra watermaker with MPC-5000 Controller (c/w spare seawater filters)

• Facnor furling system upgraded with turnbuckle/16mm OD integral eye to enable forestay removal through drum, thus permitting foil extrusions to be replaced without recourse to cutting the forestay

• Smartkat inflatable tender c/w footpump, powered by 2.3HP Honda 4 stroke outboard

• SeaSava 4 (valise), 4 person liferaft (expired service)

• Stainless comms pillar mounted at stern with tackle for easily raising rudder blade and generator

• Mahogany duckboard custom built for port ama

• 35 metres of 8mm calibrated galvanised chain

• Fortress 4.7kg FX-16 aluminium anchor and 50 metres x 16mm textile leaded anchor warp, with swivel

• bosun's chair

• 8mm chain grab hook on length of warp

• Sundry spares and consumables